Description: The Model 3058 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide overrange stops. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. For an accelerometer designed for adhesive mounting, see the Model 3052. For uncompensated accelerometers, please refer to the Models 3022 and 3028.

Features:

1. • Piezoresistive MEMS, DC Response
2. • Millivolt Output
3. • Integral Temperature Compensation
4. • Bolt Mount
5. • ±0.5% Non-linearity (typical)
6. • ±1.0% Temperature Performance (Typical)
7. • DC Response, Gas Damping
8. • Built-in Overrange Stops
9. • Low Power
10. • ±2g to ±200g Dynamic Ranges

Applications:

1.  Vibration/Shock monitoring,
2. Inertial guidance,
3. Motion control,
4. Impact testing,
5. Transportation

   For More Information Please DOWNLOAD Datasheets